Bugs left to fix

[Matthew King]

Thanks to Marc Berthomeaux, the follow bugs have been identified:


P3D V4 standard version:
-----------------------
- Radio COMM is not set to ON during the ORIGINATING checklist.
- Parking brake blocked during pushback with GSX when announcement ‘please release the parking brake after the BEFORE START checklist. Press ‘;’
- YD2 INOP on EICAS after the BEFORE START checklist. Press YD2 ENGAGE.
- Close the APU door after the copilot stops the APU during the AFTER START checklist. Press the Apu Door Close button. - Fixed
- No flight command check during the TAXI checklist (not integrated).
- The LOGO light is not turned OFF at 10,000 feet (not integrated).

P3D V4 professional version:
---------------------------
- Radio COMM is not set to ON during the ORIGINATING checklist.
- Checklist blocked when starting the APU during the SAFETY checklist. Press ‘Ctrl.’ - Fixed
- blocked APU ON during the BEFORE START checklist. Press ‘Ctrl’. - Fixed
- YAW DAMPER or YD2 INOP (random) on EICAS after the BEFORE START checklist.Press YD1 and/or YD2 ENGAGE.
- Parking brake blocked during pushback with GSX when announcement ‘please release the parking brake ’after the BEFORE START checklist. Press ‘;’.
- Close the APU door after the copilot stops the APU during the AFTER START checklist. Press the Apu Door Close button.
- The altitude is not set correctly during the TAXI checklist.
- L-REV and/or R-REV are not set to OFF (randomly) during the checklist BEFORE TAKEOFF.
- The Cruise Power is not managed by the copilot announce 'Cruise Power. Adjust the speed. Then the speed should be managed by the copilot. - Fixed
- No RUDDER check during the TAXI checklist (not integrated).
- The LOGO light is not turned OFF at 10,000 feet (not integrated).
- The data ‘Payload to load and‘ fuel to load ’are not updated in the EFB of the CRJ via the ‘Brief’ panel.


These will all be fixed in 2 weeks.