|
Post by ghostee on Aug 12, 2021 21:38:11 GMT -5
I have just brought the program, nothing wrong with it, me not understanding it.Watch the videos on the internet more confusing. Trying to understand after a connect to QW787-9 do i need to turn the GPU on myself via the QW GPU panel and set the door 1 to open. I have try ctrl E the external door doesnt open. I had to open the door thru QW Door Panel. If i dont set the GPU on thru the QW GPU Panel and FSFO set to GPU no power to the a/c when the co-pilot comes into the cockpit or he doesnt turn the gpu or the Apu to on to provide power. Does FSFO pro by setting to GPU tells the co-pilot source of power is the GPU not the APU. If that the case do i need turn on the GPU by the QW Panel and set APU in FOSO pro 2.04. What i seen of the program is great, but little understanding in getting it to work. I'm willing to do a Teamviewer session. I put two other friends onto FSFO Pro 2.04, they also having the same problem in what i'm having to get it going. Hope to have it sorted out to enjoy FSFO Pro 2.04. By me turning on the GPU by the QW Panel and letting in the co-pilot during the preflight he will turn on the Apu because i have it set in FSFO but will not disconnect the GPU for the APU. While the GPU is on he will start the APU but will not turn on the APU Gen while the GPU still plug in. At a lost
|
|
|
Post by Matthew King on Nov 21, 2021 10:33:29 GMT -5
For the QW products, you need to connect the GPU via the EFB; this is not necessary for PMDG/Aerosoft products as both expose the GPU settings via their SDK. Getting back to GW, once you connect the GPU, your copilot will configure all the switches (i.e. click external power). Does this make sense?
|
|