|
Post by misctw on Feb 15, 2022 11:52:38 GMT -5
Michael, I'll move all the test possible to the Pre Flight Flow; some test (e.g. TCAS) will have to remain in the Before Start Flow as they're dependent on other actions (e.g. CDU Preflight). I'll make the changes this weekend. Matt Thank you! Michael
|
|
|
Post by yolo1956 on Feb 17, 2022 16:59:21 GMT -5
Hi Matthew,
Just flew FBWA320 with FSFO NEXT 1.0.6.0. It looks good and is working well.
Perhaps I have missed it but please note that in the various FBW A320 checklist available on flightsim.to the following can be found : 1) during pushback & before startup : CLOCK (ET) has to be set to RUN - a button has to be moved to left (ET is the lower setting/field, if you understand my note) 2) during/before Take-off : CHR(ono) has to be set to START - a button has to be clicked on (CHR is the upper setting/field, if you understand my note).
I believe while reading my earlier reply I errorneously mentioned something else. No hurry, just again a revised suggestion, if/when possible in your next update.
Regards
Johan
|
|
|
Post by Matthew King on Feb 18, 2022 2:41:32 GMT -5
I will fix for the next release Johan. If I recall correctly, I didn't execute this because the FBW didn't have a run mode yet.
|
|
|
Post by Matthew King on Feb 20, 2022 2:45:27 GMT -5
Hi Matthew, Just flew FBWA320 with FSFO NEXT 1.0.6.0. It looks good and is working well. Perhaps I have missed it but please note that in the various FBW A320 checklist available on flightsim.to the following can be found : 1) during pushback & before startup : CLOCK (ET) has to be set to RUN - a button has to be moved to left (ET is the lower setting/field, if you understand my note) 2) during/before Take-off : CHR(ono) has to be set to START - a button has to be clicked on (CHR is the upper setting/field, if you understand my note). I believe while reading my earlier reply I errorneously mentioned something else. No hurry, just again a revised suggestion, if/when possible in your next update. Regards Johan Hey Johan...I got all the requests/bugs ironed out accept this request. There's no event for me to access the CHR button..I've asked the FBW team for an assist. I'll get in the next update.
|
|
|
Post by yolo1956 on Feb 20, 2022 15:26:04 GMT -5
matthew, thanks for your reply; it is noted. regards
|
|
|
Post by minijay on Feb 23, 2022 16:49:24 GMT -5
Hi Matthew, firstly great bit of software as soon as i saw this being reviewed i thought i had to get it along with the a320 key
Is there any plans to integrate this into VR, i mainly fly VR and so far trying to use ovr toolkit isnt working to well, it would be great if there was a panel we could add in VR that would allow us to use this product fully.
i would be happy to help test anything if you had any plans to do this
Jay
|
|
|
Post by Matthew King on Feb 23, 2022 17:24:06 GMT -5
Hi Matthew, firstly great bit of software as soon as i saw this being reviewed i thought i had to get it along with the a320 key Is there any plans to integrate this into VR, i mainly fly VR and so far trying to use ovr toolkit isnt working to well, it would be great if there was a panel we could add in VR that would allow us to use this product fully. i would be happy to help test anything if you had any plans to do this Jay Absolutely; however, FSFO is written using C#, which MSFS doesn't directly support. So, I will have to rewrite it in another language. Before I event think about that, I need to ensure we stabilize the current version for ALL users.
|
|
drrsg
New Member
Posts: 7
|
Post by drrsg on Feb 28, 2022 3:17:43 GMT -5
Hi Matthew, any chance at some time of making it possible to hand over control of the aircraft to the co-pilot.
thanks
Richard
|
|
|
Post by Matthew King on Feb 28, 2022 14:03:59 GMT -5
Hi Matthew, any chance at some time of making it possible to hand over control of the aircraft to the co-pilot. thanks Richard Will come in a future update; the only limfac is you have to hold the centerline. Before pushing the update, I need to get the core components finished first.
|
|
|
Post by fear4u2envy on Mar 1, 2022 23:20:36 GMT -5
Anyway to set this up or make it for the CJ4? I absolutely love this program
|
|
|
Post by Matthew King on Mar 3, 2022 7:54:46 GMT -5
FSFO comes with a default profile that includes generic procedures/checklist. I tried it on the CJ4 and it works ok; although, not as well as the custom FSFO profiles. That may meet your needs until I code a profile specific to the CJ4.
|
|
|
Post by fear4u2envy on Mar 3, 2022 15:24:11 GMT -5
FSFO comes with a default profile that includes generic procedures/checklist. I tried it on the CJ4 and it works ok; although, not as well as the custom FSFO profiles. That may meet your needs until I code a profile specific to the CJ4. Well if you say it works thats good enough for me, you bought back my love of flying thank you.
|
|
|
Post by Matthew King on Mar 3, 2022 21:45:34 GMT -5
Let me know! CJ4 is on the list of aircraft to make custom profiles for, once I get 1.0.10 out the door. This update will fix most known bugs and give us a stable platform to work with.
|
|
|
Post by Mike B on Mar 5, 2022 7:55:06 GMT -5
Hi. Loving the product. Would it be possible to have a setting where there is a 'push to talk' button that we can use when addressing the program? I find that it picks up all sorts of extraneous noises and often interprets them as FLAPS 4.. so, if the PTT button wasn't being pushed, the program would ignore any voice input?
|
|
|
Post by Matthew King on Mar 5, 2022 12:46:52 GMT -5
Hey Mike! I'm hesitant to implement that feature as the Pilot and Copilot don't push buttons to talk with each other during the checklist portion. However, what I've done is add a soft mute feature; so, you can just hit a button when you don't want FSFO to listen...press it again when you're ready for him to execute voice commands. I've also included a PTT feature that will prevent FSFO from executing voice commands when a particular button in pressed (so, the opposite of what your requesting . This is useful for those simmers flying on Vatsim or using a voice controlled ATC. I think the soft mute button will meet your request though. Let me know!
|
|