stas
New Member
Posts: 26
|
Post by stas on Aug 4, 2022 11:37:04 GMT -5
Good afternoon. Sometimes when working in push-button mode, it may be necessary to restart the FSFO. After restarting, we get to the first screen, where the last item is <BEFORE TO CHKLST>. Is it possible to make it possible to get to the second screen, which starts with a paragraph <AFTER TAKEOFF CHKLST>? This is necessary to activate the pilot in case we are already in flight. FSFO should be changing the screen when it detects you're airborne; so, if you restart while airborne, he should automatically be going to page two. If that's not happening, there's a bigger issue because FSFO cannot read SIMVARS. I agree with you. During the flight, reloading the FSFО leads to the opening of the second page. But after landing at the airport, after touching the ground, any reload of the FSFО brings us back to the first page. I have checked this many times. Please check this moment. I am ready to help you as much as you need to fix it. Ready for any FSFO testing. Thanks for the quick replies.
|
|
|
Post by Matthew King on Aug 4, 2022 23:40:48 GMT -5
Actually, that makes a ton of sense! Ok, I'll add the option to manually chose what page is loaded. Thank you for the great explanation!
|
|
stas
New Member
Posts: 26
|
Post by stas on Aug 5, 2022 4:54:29 GMT -5
Thank you! The program gives the feeling of a live assistant in the cockpit. I want to use all its possibilities. I would like to propose to make the management of the FSFO-take out the FSFO screen on a phone or tablet according to the principle as done on the a320 phoenix. The phoenix plane tablet can be taken out to your home tablet. Please tell me, is it possible to do this with your wonderful program? For such a solution, I am ready to pay 2 times more than now.
It would be possible to fly in full screen mode on a computer.
|
|
|
Post by Matthew King on Aug 5, 2022 9:11:19 GMT -5
Because FSFO is an external problem, it is possible, stas. I will put on the list but it may be awhile to get to as my mobile developmental skills are a little rusty; still, FSFO was written in C#, which is perfect for mobile device development.
|
|
stas
New Member
Posts: 26
|
Post by stas on Aug 5, 2022 11:15:24 GMT -5
Because FSFO is an external problem, it is possible, stas. I will put on the list but it may be awhile to get to as my mobile developmental skills are a little rusty; still, FSFO was written in C#, which is perfect for mobile device development. You are the best! Sorry if I often bother you with my suggestions. I really like this program, I want it to be perfect!
|
|
|
Post by jimbrown on Aug 7, 2022 6:55:43 GMT -5
Hi Matt,
I'm back! ;-)
Been playing with the latest version for a week now. All good. I did try it with SU10 Beta, but it wouldn't work properly (says it's doing things, but it's not). Reverted to SU9 for now.
I do have a suggestion though. On the previous version I could start FSFO with Auto Flows turned off, then start them when I was ready. The Auto Flows setting (off) would stick between sessions. This is not the case with the current version. Or I'm missing a button somewhere. I can set Auto Flows off, but when I'm ready to go and have turned Auto Flows on, the next time I start FSFO, Auto Flows are already on.
Thanks, ...jim
|
|
|
Post by Matthew King on Aug 7, 2022 10:37:58 GMT -5
Glad you're back, Jim!
Are you referring to the FBW or FEN A320? I know the latter does not work in Beta 10. You can absolutely turn AutoFlow On/Off; you just have to hit the operation button (last button to your right); you should see the Auto Flow option above the Cabin Messages option.
|
|
|
Post by jimbrown on Aug 7, 2022 13:46:57 GMT -5
Hi Matt,
FBW A320. FSFO v1.2.0.0 would not work for me using SU10 Beta. I did check FSUIPC and was seeing the LVARS there. FSFO managed to power up the aircraft via GPU, but after that it was doing stuff but the aircraft was not responding to what FSFO was doing (buttons not being pushed or turned, FMC not being programmed, etc.) So, I went back to SU9 for now.
As for the auto flows, issue is that once I turn on the auto flows all is good, I finish the flight and I exit the sim and FSFO. Next time I start FSFO, auto flows are already turned on. I'd rather have an option that auto flows are always turned off when I start FSFO, and I can then decide when I want to have them start.
Thanks! ...jim
|
|
|
Post by tikiman on Aug 7, 2022 20:51:44 GMT -5
Hi Matthew, I'm a new user an am really enjoying this add-on. I'm using P3dV5. My suggestion, if it hasn't been mentioned, is to allow the Accent/Language drop-down menu to see all pilot folders dropped into the sound folder. I have a zillion pilots voices and would like to convert them. It would be great to have the ability to select them from the dropdown instead of having to use only the five folders available. Thanks Jim Can the pilot voices be used for sale? I don't want to steal someone else work without thier permission. I'm not sure what you mean by that. That wasn't my question. The voices are my own custom made. And, for FSFO, I can usually make a (either a real person or TTS) set in a couple of hours. But my question was more about the UI reading more than the five folders. Right now you can only select five voice sets, and one flight attendant.
|
|
|
Post by antipodean on Aug 8, 2022 5:13:00 GMT -5
Would it be possible to add a feature where I can map a button to the same action as ALT/CTRL so I can skip without having to click in FSFO window to make it active before using ALT/CTRL? By Using a button, I should be able to keep MSFS window as my active window, instead of having to click into FSFO, use ALT/CTRL, and then have to click back in MSFS window.
|
|
britflight
New Member
with new update now cycling through menu's ok. Done two flights on with and on without voice control
Posts: 30
|
Post by britflight on Aug 8, 2022 10:47:55 GMT -5
In the FSFO taxi checklist I cannot see a facility for a brake test which is included in my FS2cew. Is there one?
|
|
|
Post by reaver on Aug 9, 2022 20:33:08 GMT -5
Would it be possible to have the Manage Flaps and Gear in the user options as separate options, Manage Flaps, Mange Gear?
|
|
|
Post by Matthew King on Aug 13, 2022 9:45:34 GMT -5
Would it be possible to have the Manage Flaps and Gear in the user options as separate options, Manage Flaps, Mange Gear? Yes - I-lol get it for the next update.
|
|
|
Post by Matthew King on Aug 13, 2022 9:45:48 GMT -5
In the FSFO taxi checklist I cannot see a facility for a brake test which is included in my FS2cew. Is there one? I can add to the next update.
|
|
|
Post by dal123 on Aug 16, 2022 17:29:10 GMT -5
Any way to add a option prior to preflight for using stairs, or jetway? Then when starting app, the co plot would activate the appropriate option for loading passengers. The bus call out would be great if using the stairs also. Has PMDG released the SDK?
|
|