|
|
Post by misctw on Dec 1, 2022 6:48:14 GMT -5
I did not have much time to fly recently, but I did two flights today with the Fenix using the Integrated Crew Ops. These are some issues that I encountered in both flights (FSFO and FSUIPC are both up-to-date): The “After Takeoff Flow” in the “After Takeoff Checklist” shows at least two (possibly three) items that probably should belong in the “Descent Flow”.  During the “Descent Flow” the “Set Auto Brakes” shows up as an item in the Checklist, but the FO does not actually set it, although it is set/defined in the “Performance Data” page. That’s it for the moment! Regards, Michael |
|
|
|
Post by Matthew King on Dec 1, 2022 10:13:12 GMT -5
Fantastic catch! I'll get them fixed in the next update.
|
|
|
|
Post by kiwi0ne on Dec 4, 2022 19:27:19 GMT -5
If I can continue this thread please. Yesterday and the day before I flew the Fenix and notices that:
1. the FO leaves the APU Bleed ON even though the APU has been turned off.
2. The Crew Supply button is not turned on during the initial flow from a cold and dark state.
Also, During the descent and when needing more drag, as soon as I would deploy the spoilers, the FO would start saying: "Managed Mode on, Managed Climb on" repeatedly for a few times.
Any help would be appreciated.
Thank you!
|
|
|
|
Post by misctw on Dec 5, 2022 6:56:13 GMT -5
About the problem with the FO not setting the Autobrakes during descent:
Someone mentioned on Discord that the FO would only set the Autobrakes when "Medium" is selected, but not "Low". I can confirm that. "Medium" works without problems, but the FO does not set the brakes when "Low" is selected on the Data page.
Regards,
Michael
|
|
britflight
New Member
with new update now cycling through menu's ok. Done two flights on with and on without voice control
Posts: 30
|
Post by britflight on Dec 5, 2022 8:51:02 GMT -5
During the “Descent Flow” the “Set Auto Brakes” shows up as an item in the Checklist, but the FO does not actually set it, also experiencing this and during approach to landing and not using voice control, the FO sets Flaps 1 and 2 but not 3 and 4 |
|
|
|
Post by Matthew King on Dec 6, 2022 23:28:31 GMT -5
During the “Descent Flow” the “Set Auto Brakes” shows up as an item in the Checklist, but the FO does not actually set it, also experiencing this and during approach to landing and not using voice control, the FO sets Flaps 1 and 2 but not 3 and 4 Do you have the flaps set in the FSFO PERF FLAP set to 3 or 4? If you don't populate that field, FSFO won't set flaps 3 or 4 as he doesn't know what final flap setting to use. |
|
|
|
Post by Matthew King on Dec 6, 2022 23:29:13 GMT -5
About the problem with the FO not setting the Autobrakes during descent: Someone mentioned on Discord that the FO would only set the Autobrakes when "Medium" is selected, but not "Low". I can confirm that. "Medium" works without problems, but the FO does not set the brakes when "Low" is selected on the Data page. Regards, Michael Very helpful! Let me get the ini310 tested and I'll focus my attention to get everything fixed in this thread. |
|
|
|
Post by kiwi0ne on Dec 7, 2022 18:31:37 GMT -5
Thanks Matthew!
|
|
|
|
Post by Matthew King on Dec 10, 2022 11:51:19 GMT -5
Should be done before the Holidays so you can enjoy during your breaks.
|
|
