Report Bugs Here

[lefuneste]

hello,

i have a new issue perhaps !
with a B1900d by pmdg, i unselected the speed control in my preferences. But when i reach 1000 ft above my FL in descent mode, there is the noise and the reset to 1000 ft/min (normal), but also the Speed Hold is just been checked autmatically.

Gear raise => no gear raise with my planes. Could you explain me what the "copilot" do or check in the program to raise. it's the same "letter" in the keyboard to raise and to lower.

Mng complexe light : I think the plane must rolls at a very little speed near the beginning of the runway to succeed in. If i roll near 25 knt, or if i decide to enter in the middle of the runway, i think there is no action, isn't it ?

thank you

[Matthew King]

Joker,

There's no way in the current version. Don't worry, I'll have 2.1 ready by next weekend.

[pelican2a]

Hello
There's a little difference between N1 and N2 of engine 1 and 2 in the PROG sheet page 2/3. Normal?

[joker89]

Jan 18, 2014 20:17:56 GMT -5 Matthew King said:

Joker,

There's no way in the current version. Don't worry, I'll have 2.1 ready by next weekend.

thank you sir, looking forward!
Meanwhile, could you suggest any way or workaround to use the approach functionalities with MJC8? Everything works fine from pre-fligth to approach transition altitude, but after that, nothing .

[joker89]

Jan 6, 2014 16:11:49 GMT -5 lefuneste said:

- Before landing checklist.
o I choose an another figures than 5 nm in user profile, it seems to work good with this new distance, but when I reopen the user profile page, my figure is not proposed. I have seen in the user.cfg file, and my previous figure is ok (perhaps a problem of screening ?)

There is an identical bug for After Takeoff Checks altitude

[Matthew King]

I'll check on that one, joker...

[roger]

Not a true bug but...in the Aircraft Profile section under Aircraft Systems there is a checkbox Altidue Alert instead of Altitude Alert.

[Matthew King]

nice catch, Roger!

[roger]

I also noticed some typos in the manual. I can send those to you if you are interested.

[7523madu]

Hallo Matthew
Many thanks for this great software.
I detected the following buggs:
No sound is hearable by flap 10
ACARS: The displayed ZULU-time is wrong (allways 2 hours difference between local an ZULU, no matter where you are)
Many thanks

[lefuneste]

Hello Matthew

Very nice version this 2.1.
I try it with an updated version of my old 738FSX, for a freeware 737-500. No real difference between it and the FSX default one.

I see those malfunctions in my tries. perhaps bugs ?

1) Sometimes i have this message during the flight but less than i used the V2.0.
"FSUIPC Error #12: FSUIPC_ERR_SENDMSG. Error sending message to FSUIPC"

2) My Aircraft profile with option Spd hold => no Spd hold checked in the OPT Page during the flight, but the copilot manage the speed in spite of this (the same in V2.0)

3) No gear retracted by the copilot. i don't understand why. Same thing as V2.0.

4) After start chklist => copilot set flaps to 2 but my choosed setting TO is 5 and i don't see anything on the MCP inspite of using chklist flows.

5) Before take off, if we put flt dir on, there is also the wing lights which be checked on the sys panel.
In flight this wing light is unchecked ! (same thing in V2.0)

6) When we reach 1000 ft above the altitude selected on the AP, the autothrust switch to N1 (same in V2.0)

7) the copilot doesn't put the autobrake himself at the arrival. But if we force it to a value, he raise it at the end of the decelleration... nice

8) If i use the CTRL+A or the app mode button on the 2D aircraft panel to catch the ILS, there no checked box on Apr Hold but Alt and Hdg boxes are unchecked correctly when i am on the ils (glide + loc)

This V2.1 is more efficient than V2.0. Please continue to update it. I love this copilot.

Lefuneste

[Matthew King]

Madu,

I'll check on the flaps 10. Great find on the Zulu time; it actually explains why the log book time is screwed up too. Converting to local to Zulu time is actually a class built into the .NetFramework; so, I ask Microsoft if this is a known issue. Again, great find....

lefuneste,

Are you using FS2004? FSUIPC Error #12 is actually an exception thrown by FSUIPC. I'll check on the other errors, but there's something very unique about your setup...not understanding the landing gear problem at all.

[regen]

"FSUIPC Error #12: FSUIPC_ERR_SENDMSG. Error sending message to FSUIPC"
I had this message on my last flight with the Majestic Dash in FSX. I have the free version of FSUIPC. FSX froze and wouldn't restart.
Otherwise I haven't had any problems with the latest version.

[7523madu]

Hallo Matthew
I posted a bug on March 26 concerning flaps 10 sound. I enhance my information to help you to find the bug more easely (I hope so).
This happens only when I am on the ground and set the flaps. I hear flap 1, flap 2, flap 5, nothing, flap 15, aso
When I land and have the parameters for the flap extension speed (into SPDS) sets, I hear the sound flap 10 !

I have also a second bug. I set the Flap Extension Speed from my TOLD. Flaps 1 is not set automatically when the Flaps 1 speed is reached. I have to set it manually. After this, all other flaps are set automatically when the respective speed is reached.

I hope You can find something

kind Regards

Philippe

[lefuneste]

lefuneste,

Are you using FS2004? FSUIPC Error #12 is actually an exception thrown by FSUIPC. I'll check on the other errors, but there's something very unique about your setup...not understanding the landing gear problem at all.

Hello,

I'm using FSX sp2 (not acceleration) and FSUIPC registered version 9.28.
I have this problem in long flights > 2h. and when i use x2 speed or more too.
FSX freeze, and i need clicking several times on "continue". After that, fsfo is disconnected and i can re-connect it to continue using it. he don't crash fsx .